Servos are powered by the ESC’s output to the receiver. If you’re using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience ‘brown-outs’ where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
- Total Height (A) = 64mm
- Body Width (B) = 66mm
- Below Mount (C) = 41mm
- Above Mount (D) = 18.5mm
- Total Length (E) = 81.4mm
- Total Width (F) = 30mm
Specifications
| Servo | |
|---|---|
| Servo Size: | 1/5 |
| Waterproof Casing: | No |
| Gear Material: | Metal |
| Torque kg/cm: | 45 |
| Signal Type: | Digital |
| Case Material: | Metal |
| Rotational Degrees: | 120o (Normal) |
| “A” Measurement: | 64 |
| “B” Measurement: | 66 |
| “C” Measurement: | 41 |
| “D” Measurement: | 18.5 |
| “E” Measurement: | 81.4 |
| “F” Measurement: | 30 |







Reviews
There are no reviews yet.