Servos are powered by the ESC’s output to the receiver. If you’re using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience ‘brown-outs’ where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
- Total Height (A) = 63.1mm
- Body Width (B) = 66.1mm
- Below Mount (C) = 40mm
- Above Mount (D) = 23.1mm
- Total Length (E) = 81.7mm
- Total Width (F) = 29.9mm
Specifications
| Servo | |
|---|---|
| Servo Size: | 1/5 |
| Servo Spline Count: | 15 |
| Drive Motor Type: | Brushed |
| Waterproof Casing: | No |
| Gear Material: | Metal |
| Torque kg/cm: | 60 |
| Signal Type: | Digital |
| Case Material: | Plastic |
| Rotational Degrees: | 120o (Normal) |
| “A” Measurement: | 63.1 |
| “B” Measurement: | 66.1 |
| “C” Measurement: | 40 |
| “D” Measurement: | 23.1 |
| “E” Measurement: | 81.7 |
| “F” Measurement: | 29.9 |










Reviews
There are no reviews yet.